Analog Inputs
2 pr. balanced via XLR connectors
3 pr. single-ended via RCA connectors
Digital Inputs
1 EIAJ Toslink Optical
1 S/PDIF Coax
2 HDMI (HDMI 2.0a, HDCP 2.2) + 1 HDMI Output
1 USB-A (USB 2.0 host)
1 USB-B (USB 2.0 audio device)
1 Bluetooth with aptX
Outputs
1 pr. preamp outputs via RCA connectors
1 pr. speaker outputs via gold-plated binding posts
Control Inputs
1 RS-232 input via 9-pin D-subminiature connector
1 remote IR detector input via 3-conductor 3.5 mm connector
1 12 VDC trigger input via 2-conductor 3.5 mm connector
Control output
1 12 VDC trigger output (60 mA maximum current) via 2-conductor 3.5 mm connector
Input impedance
Balanced: 16 kΩ
Single-ended: 8 kΩ
Frequency response
20 Hz to 20 kHz +0, -0.22 dB
<10Hz to 100kHz +0, -0.57 dB
Signal-to-noise ratio
>104 dB, wideband, unweighted, at 2V RMS in balanced, referred to full power output
>117 dB, “A”-weighted
Gain
25 dB, referenced to 2V RMS in balanced and full power output
Input Overload
10.4 V RMS Balanced
6.8 V RMS Single-ended
Total harmonic distortion
<0.015%, 1 kHz, 150 W, 8 Ω load
<0.08%, 20 kHz, 150 W, 8 Ω load
Output power
150 W RMS per channel at 8 Ω
300 W RMS per channel at 4 Ω
Output voltage
98 V peak to peak
34.6 V RMS
Slew rate
46 V/µs
Output impedance
<0.023 Ω, 20 Hz
<0.035 Ω, 20 Hz to 20 kHz
Damping factor
>347, 20 Hz, referred to 8 Ω
>228, 20 Hz to 20 kHz, referred to 8 Ω
Power consumption
Standby: 11 W
Idle: 46 W
Maximum: 900 W
Heat output
Standby: 37 BTU/hr
Idle: 156 BTU/hr
Maximum: 3060 BTU/hr
Dimensions
438 mm W x 105 mm H x 457 mm D
Weight
Unit only: 23.6 kg
As shipped: 27.3 kg
Digital Module Specs
Coaxial and HDMI inputs support PCM up to 24-bit/192kHz.
Optical input up to 24-bit/96kHz
HDMI inputs support DSD and 4K video content.
HDMI output supports Audio Return Channel (ARC)
USB and Network streaming support MP3, AAC, WMA, WAV(PCM), FLAC, ALAC up to 192kHz
Bluetooth streaming supports A2DP, AVRCP, HFP, HSP
Made in USA